Controllable Image‐Based Transfer of Flow Phenomena

Modelling flow phenomena and their related weathering effects is often cumbersome due their dependence on the environment, materials and geometric properties of objects in the scene. Example‐based modelling provides many advantages for reproducing real textures, but little effort has been devoted to reproducing and transferring complex phenomena. In order to produce realistic flow effects, it is possible to take advantage of the widespread availability of flow images on the Internet, which can be used to gather key information about the flow. In this paper, we present a technique that allows the transfer of flow phenomena between photographs, adapting the flow to the target image and giving the user flexibility and control through specifically tailored parameters. This is done through two types of control curves: a fitted theoretical curve to control the mass of deposited material, and an extended colour map for properly adapting to the target appearance. In addition, our method filters and warps the input flow in order to account for the geometric details of the target surface. This leads to a fast and intuitive approach to easily transfer phenomena between images, providing a set of simple and intuitive parameters to control the process.     

Electric transport properties of rare earth doped YbxCa1-xMnO3 ceramics (part I: Optimization of ceramic processing)

A comprehensive study was performed in order to find the effect of different calcination and sintering conditions on the physical properties of calcium manganite ceramics in dependence of temperature T and partial pressure of oxygen p(O₂). The eventual formation of oxygen vacancies during sintering was investigated and the results were confirmed by monitoring the release of oxygen using a ZrO₂ oxygen sensor. The phase transition behavior was studied using thermogravimetric analysis (TGA) in a wide range of p(O₂) ≈ 10^?1 MPa down to 10^-19 MPa at high temperatures accompanied by dilatometry- and XRD-measurements. Furthermore, the present study reveals for the first time a way for reducing and preventing crack formation that may occur during sintering. The present systematic research provides essential fundamental information before performing electrical measurements necessary in order to understand important factors about charge carriers and electrical transport mechanism.     

A comparison study into low leak rate buoyant gas dispersion in a small fuel cell enclosure using plain and louvre vent passive ventilation schemes

Hydrogen, producing electricity in fuel cells, is a versatile energy source, but with risks associated with flammability. Fuel cells use enclosures for protection which need ventilating to remove hydrogen emitted during normal operation or from supply system leaks. Passive ventilation, using buoyancy driven flow is preferred to mechanical systems. Performance depends upon vent design, size, shape, position and number. Vents are usually plain rectangular openings, but environmentally situated enclosures use louvres for protection. The effect of louvres on passive ventilation is not clear and has therefore been examined in this paper. Comparison ‘same opening area’ louvre and plain vent tests were undertaken using a 0.144 m³ enclosure with opposing upper and lower vents and helium leaking from a 4 mm nozzle on the base at rates from 1 to 10 lpm, simulating a hydrogen leak. Louvres increased stratified level helium concentrations by typically in excess of 15%. The empirical data obtained was also used in a validation exercise with a SolidWorks: Flow Simulation CFD model, which provided a good qualitative representation of flow behaviour and close empirical data correlations.     

Dual-activator luminescence of LuAG:Mn4+/Tb3+ phosphor for optical thermometry

Mn⁴⁺ and Tb³⁺ singly doped and Mn⁴⁺/Tb³⁺ codoped lutetium aluminum garnet (Lu₃Al₅O₁₂, or simply LuAG) phosphors were synthesized and investigated for the application of optical thermometry. X-ray powder diffraction and luminescence spectroscopy measurements were performed on all samples to analyze their crystal phases and optical properties. In particular, temperature-dependent luminescence of the LuAG:Mn⁴⁺/Tb³⁺ sample was measured at the temperature range of 270–420 K. The results showed that the luminescence intensity of Mn⁴⁺ has gone through a remarkable decline while the luminescence of Tb³⁺ has an only insignificant change with the rise of temperature which leads to a dramatic decrease in the fluorescence intensity ratio (FIR) between the two activator Mn⁴⁺ and Tb³⁺. Further analysis showed that the LuAG:Mn⁴⁺/Tb³⁺ sample used for temperature sensing has a high relative sensitivity with maximum value of 4.3% K⁻¹ at 333 K. Our research indicated that this LuAG:Mn⁴⁺/Tb³⁺ material is a promising candidate for FIR-type optical temperature sensing.     

Self-consistent kinetic theory with nonlinear wave-particle resonances

We have developed, based on the oscillating-center transformation, a general theoretical approach for self-consistent plasma dynamics including, explicitly, effects of nonlinear(higherorder) wave-particle resonances. A specific example is then given for low-frequency responses of trapped particles in axisymmetric tokamaks. Possible applications to transport as well as nonlinear wave growth/damping are also briefly discussed.     

Development of a void ratio-moisture ratio-net stress framework for the prediction of the volumetric behavior of unsaturated granular materials

Despite extensive research on the behavior of unsaturated fine-grained materials, there is still a lack of understanding of the volumetric behavior of unsaturated granular materials. In this research, a model has been developed to predict the fundamental volumetric behavior of unsaturated granular materials through loading and wetting state paths. In this regard, a loading-wetting surface was developed in a space of void ratio-moisture ratio-net stress. A distinctive feature of the proposed model is the relative simplicity in obtaining the model parameters using conventional geotechnical testing equipment. Two types of recycled granular materials, commonly applied in unbound pavements were used, namely, recycled crushed brick (CB) and excavation waste rock (WR). The uniqueness of the developed surface was evaluated by employing a number of loading and wetting state paths. The results indicate that the developed surface is unique in its loading state paths; however, it only shows uniqueness in its wetting state paths for stress levels greater than 2000 kPa. The proposed model seeks to introduce the application of the unsaturated soil mechanics theory, for predicting the behavior of granular materials in the field, by providing a practical and cost-effective methodology.     

Microstructure and flexural strength of the Y:TZP/BG composite

The addition of bioactive glasses to a Y:TZP matrix represents a feasible alternative to provide bioactivity to this material and optimize osseointegration. This work evaluated the effect of the BG concentration (0 and 10 wt%) and the sintering temperature (1200°C and 1300°C) on the microstructure, relative density, and flexural strength of the composite Y:TZP/BG. The Y:TZP and Y:TZP/BG powders were uniaxially pressed and sintered at 1200°C or 1300°C for 1 h. The microstructure was characterized by X-ray diffraction analysis, scanning electron microscopy, and energy-dispersive X-ray Spectroscopy. Relative density was calculated from density values obtained using the Archimedes’ principle. For the flexural strength, specimens (n = 6) were fractured in a biaxial flexural setup using a piston-on-three-balls fixture in a universal testing machine. Bioactivity test was performed in simulated body fluid solution. The results suggested that BG addition decreased the grain size of the composite, increased porosity and caused a significant decrease in the relative density and flexural strength. Crystalline phases of calcium stabilized cubic zirconia and sodium zirconium silicate were formed after the addition of BG. Finally, it was concluded that composite specimens sintered at 1300°C showed the highest density values and larger grains compared to those sintered at 1200°C.     

An immersive virtual reality serious game to enhance earthquake behavioral responses and post-earthquake evacuation preparedness in buildings

Enhancing the earthquake behavioral responses and post-earthquake evacuation preparedness of building occupants is beneficial to increasing their chances of survival and reducing casualties after the mainshock of an earthquake. Traditionally, training approaches such as seminars, posters, videos or drills are applied to enhance preparedness. However, they are not highly engaging and have limited sensory capabilities to mimic life-threatening scenarios for the purpose of training potential participants. Immersive Virtual Reality (IVR) and Serious Games (SG) as innovative digital technologies can be used to create training tools to overcome these limitations. In this study, we propose an IVR SG-based training system to improve earthquake behavioral responses and post-earthquake evacuation preparedness. Auckland City Hospital was chosen as a case study to test our IVR SG training system. A set of training objectives based on best evacuation practice has been identified and embedded into several training scenarios of the IVR SG. Hospital staff (healthcare and administrative professionals) and visitors were recruited as participants to be exposed to these training scenarios. Participants’ preparedness has been measured along two dimensions: 1) Knowledge about best evacuation practice; 2) Self-efficacy in dealing with earthquake emergencies. Assessment results showed that there was a significant knowledge and self-efficacy increase after the training. In addition, participants acknowledged that it was easy, helpful, and engaging to learn best evacuation practice knowledge through the IVR SG training system.     

Preparation and characterization of multilayer Gd2O2S:Tb phosphor screen for X-ray detection application

Gd2O2S:Tb (GOS) phosphor screen, generally with a multilayer structure, has been widely used in digital X-ray imaging. GOS phosphor screen is fabricated via a slip casting route, which is an effective method to obtain multilayer composites with good strength. The GOS slurry was prepared using the menhaden oil, polyvinyl butyral and PEG-400 as dispersant, binder and plasticizer, respectively, and slip casted on a support layer. After the GOS scintillation layer is formed, a transparent polyethylene terephthalate film is covered on it as a protective layer. The X-ray excited emission spectra of the obtained GOS phosphor screen is well match to the spectral response of a-Si:H photodiode, and the spatial resolution was close to 3.7 LP/mm, which could meet the request of the commercial application.